PDA

View Full Version : How to put more than five different vehicles?



darkes88
May 8th, 2010, 06:37 PM
i used another laptop to modify maps.. when i changed to a new computer... this have ocurred i dont know whats happening..
sapien closes down i dont know if there is an update of sapien, i saw hobov 102, i dont know if there is another update... for it..

Roostervier
May 8th, 2010, 06:41 PM
open up debug.txt and copy and paste the last entry

darkes88
May 8th, 2010, 06:51 PM
open up debug.txt and copy and paste the last entry

04.23.10 02:11:31 kornman00 02.00.00.0609
04.23.10 02:11:31 reference function: _write_to_error_file_zomg_h4xmb
04.23.10 02:11:31 reference address: 4011a4
04.23.10 02:11:31 Couldn't read map file './kornman00beta.map'


04.24.10 16:29:33 kornman00 02.00.00.0609
04.24.10 16:29:33 reference function: _write_to_error_file_zomg_h4xmb
04.24.10 16:29:33 reference address: 4011a4
04.24.10 16:29:33 Couldn't read map file './kornman00beta.map'


05.09.10 09:47:18 sapien pc 01.00.00.0609 ----------------------------------------------
05.09.10 09:47:18 reference function: _write_to_error_file
05.09.10 09:47:18 reference address: 401b13
05.09.10 09:47:18 Couldn't read map file './sapienbeta.map'
05.09.10 09:47:19 CreateDevice succeeded with refresh rate = 0
05.09.10 09:47:20 Increasing sound decompression buffer size to 1048576 bytes
05.09.10 09:47:44 file_read('tags\levels\test\bloodgulch\bloodgulch. bitmap') error 0x00000026 'Se ha alcanzado el final del archivo. '
05.09.10 09:47:44 couldn't read #108 bytes from offset #64 in local tag 'tags\levels\test\bloodgulch\bloodgulch.bitmap'
05.09.10 09:47:44 couldn't read elements for bitmap block
05.09.10 09:47:44 failed to load bitmap tag 'levels\test\bloodgulch\bloodgulch'
05.09.10 09:47:45 failed to load scenario_structure_bsp tag 'levels\test\bloodgulch\bloodgulch'
05.09.10 09:47:45 failed to load structure bsp 'levels\test\bloodgulch\bloodgulch'


05.09.10 09:49:25 sapien pc 01.00.00.0609 ----------------------------------------------
05.09.10 09:49:25 reference function: _write_to_error_file
05.09.10 09:49:25 reference address: 401b13
05.09.10 09:49:25 Couldn't read map file './sapienbeta.map'
05.09.10 09:49:25 CreateDevice succeeded with refresh rate = 0
05.09.10 09:49:26 Increasing sound decompression buffer size to 1048576 bytes
05.09.10 09:49:26 file_read('tags\levels\test\bloodgulch\bloodgulch. bitmap') error 0x00000026 'Se ha alcanzado el final del archivo. '
05.09.10 09:49:26 couldn't read #108 bytes from offset #64 in local tag 'tags\levels\test\bloodgulch\bloodgulch.bitmap'
05.09.10 09:49:26 couldn't read elements for bitmap block
05.09.10 09:49:26 failed to load bitmap tag 'levels\test\bloodgulch\bloodgulch'
05.09.10 09:49:26 failed to load scenario_structure_bsp tag 'levels\test\bloodgulch\bloodgulch'
05.09.10 09:49:26 failed to load structure bsp 'levels\test\bloodgulch\bloodgulch'

Higuy
May 8th, 2010, 07:10 PM
Re extract Bloodgulch with HEK+. Your missing a file.

darkes88
May 8th, 2010, 07:22 PM
i have tryed that as 3 times... and still dont working
i still thinking there is a update for this problems

Higuy
May 8th, 2010, 07:28 PM
Ok, well your obviously doing it wrong then, it tells you the exact file you need, which is bloodgulch.bitmap. So extract that sole file, and it should work. There is no reason to doubt it wouldnt. Bungie, Gearbox, and M$ have never made an update for HEK.

darkes88
May 8th, 2010, 07:37 PM
i have tried that too, ummmm i have read about dual processors and i have tried with the afinity selecting just one, and nothing

darkes88
May 8th, 2010, 07:45 PM
now i get this
05.09.10 18:33:12 sapien pc 01.00.00.0609 ----------------------------------------------
05.09.10 18:33:12 reference function: _write_to_error_file
05.09.10 18:33:12 reference address: 401b13
05.09.10 18:33:12 Couldn't read map file './sapienbeta.map'
05.09.10 18:33:12 CreateDevice succeeded with refresh rate = 0
05.09.10 18:33:13 Increasing sound decompression buffer size to 1048576 bytes
05.09.10 18:33:13 file_read('tags\levels\test\bloodgulch\bloodgulch. bitmap') error 0x00000026 'Se ha alcanzado el final del archivo. '
05.09.10 18:33:13 couldn't read #108 bytes from offset #64 in local tag 'tags\levels\test\bloodgulch\bloodgulch.bitmap'
05.09.10 18:33:13 couldn't read elements for bitmap block
05.09.10 18:33:13 failed to load bitmap tag 'levels\test\bloodgulch\bloodgulch'
05.09.10 18:33:13 failed to load scenario_structure_bsp tag 'levels\test\bloodgulch\bloodgulch'
05.09.10 18:33:13 failed to load structure bsp 'levels\test\bloodgulch\bloodgulch'


and it says couldnt read.... not that this cant be found

Higuy
May 8th, 2010, 08:09 PM
now i get this
05.09.10 18:33:12 sapien pc 01.00.00.0609 ----------------------------------------------
05.09.10 18:33:12 reference function: _write_to_error_file
05.09.10 18:33:12 reference address: 401b13
05.09.10 18:33:12 Couldn't read map file './sapienbeta.map'
05.09.10 18:33:12 CreateDevice succeeded with refresh rate = 0
05.09.10 18:33:13 Increasing sound decompression buffer size to 1048576 bytes
05.09.10 18:33:13 file_read('tags\levels\test\bloodgulch\bloodgulch. bitmap') error 0x00000026 'Se ha alcanzado el final del archivo. '
05.09.10 18:33:13 couldn't read #108 bytes from offset #64 in local tag 'tags\levels\test\bloodgulch\bloodgulch.bitmap'
05.09.10 18:33:13 couldn't read elements for bitmap block
05.09.10 18:33:13 failed to load bitmap tag 'levels\test\bloodgulch\bloodgulch'
05.09.10 18:33:13 failed to load scenario_structure_bsp tag 'levels\test\bloodgulch\bloodgulch'
05.09.10 18:33:13 failed to load structure bsp 'levels\test\bloodgulch\bloodgulch'


and it says couldnt read.... not that this cant be found

Uh.. "file_read('tags\levels\test\bloodgulch\bloodgulch. bitmap') error 0x00000026 'Se ha alcanzado el final del archivo. "

Means it can't find the file. I don't know why its in Spanish for you, unless your Spanish.

Amit
May 8th, 2010, 08:43 PM
Run in compatibility mode for Windows XP

teh lag
May 9th, 2010, 09:36 AM
Run in compatibility mode for Windows XP

What would that accomplish? The error is pretty clearly about being unable to read a specific bitmap.

http://tehlag.modacity.net/one/notpix/bloodgulch.bitmap

Try replacing your current bloodgulch.bitmap with this one. It just seems like you have a corrupted bitmap, that's all (when tool says it "reached the end of the file" that's what that means).

ShadowSpartan
May 9th, 2010, 10:20 AM
Uh.. "file_read('tags\levels\test\bloodgulch\bloodgulch. bitmap') error 0x00000026 'Se ha alcanzado el final del archivo. "

Means it can't find the file. I don't know why its in Spanish for you, unless your Spanish.
If you are going to help people, then you should at least know what you are talking about. As Lag said, "couldn't read #108 bytes from offset #64 in local tag" means that the tag is corrupted. The bitmap tag does exist and sapien can find it just fine, but when sapien tries to open the file and parse the tag data, it runs into an error and has to close.

I think the reason it didn't work when you tried to re-extract using HEK+ is the fact that the tag already exists, and you had not selected the "overwrite" option for extraction (not recommended to do that anyway).

darkes88
May 9th, 2010, 12:02 PM
i dont know what was the really problem... but what i did.. was reinstalling it and now it works
thanks!!

darkes88
May 9th, 2010, 12:14 PM
When i try to open a tag with This software of kornman this error couldnt find library(C:\Program files\Microsoft office\office12\Grooveutil.dll)
ensure that is installed
i have done what this post says but nothing
http://www.modacity.net/forums/showthread.php?t=3305&highlight=grooveutil.dll

annihilation
May 9th, 2010, 12:28 PM
What does it say when you try to install?

Amit
May 9th, 2010, 12:39 PM
What would that accomplish?

I had the same problem literally 2 weeks ago. As soon as I Selected windows XP it decided it wanted to work. Opened the Bloodgulch file no problem.

darkes88
May 9th, 2010, 01:30 PM
nothing it just install as succesfull

annihilation
May 9th, 2010, 01:41 PM
Uh...
Try unistalling the Groove Monitor features. The features, not the whole thing.

darkes88
May 9th, 2010, 01:44 PM
I would like to know how to put some custom weapons when a game is starting, if i want to put a sword i want that this persona start with the sword and dont with the pistol.
i dont remember well but i used before this softwares to custom maps, i dont know if this can be configured in guerrilla
ill be gratefull if you can help me to remember

darkes88
May 9th, 2010, 01:47 PM
emmm.... i dont know how to uninstall it, i dont have a idea of where to look for uninstalling it..
if u know can u guide me?!...:D

annihilation
May 9th, 2010, 01:49 PM
Start>Control Panel> Add or Remove programs
Run the uninstaller for Microsoft Office and it should give you the option to uninstall its features.

annihilation
May 9th, 2010, 01:58 PM
I don't think you can a give certain weapon to a certain player when you spawn unless it's a SP map.
You can randomize it though.

And I don't even know what the hell you said in that last part so can't help you there.

darkes88
May 9th, 2010, 02:14 PM
...ok.. it is that i knew it, but i forgot it, i know this is impossible to give each weapon to each player i just want to change ( like saying a mod as when people just put snipers and start with snipers), i just want to start with a sword and another weapon, all player

darkes88
May 9th, 2010, 02:20 PM
ummm i thougt on it, in that case i would say no, because i use microsoft of office.. so stop it

darkes88
May 9th, 2010, 03:13 PM
I would like to know how to put more than five vehicles spawn in a map, i remember that its by notepad,
but a dont remember well, then its compiled when is used tool.exe but really i want to remind that..
if someone can tell me plz,

SnaFuBAR
May 9th, 2010, 03:42 PM
this is your help thread now. you don't need 4 different ones on the first page alone. use this from now on

annihilation
May 9th, 2010, 09:29 PM
I would like to know how to put more than five vehicles spawn in a map, i remember that its by notepad,
but a dont remember well, then its compiled when is used tool.exe but really i want to remind that..
if someone can tell me plz,
In sapien, put:


(script startup vehicles
(object_create_anew <vehicle name>)
)
You do that for every vehicle type you want to spawn.

sevlag
May 10th, 2010, 06:22 AM
In sapien, put:


(script startup vehicles
(object_create_anew <vehicle name>)
)
You do that for every vehicle type you want to spawn.wait what? where would one put that?

annihilation
May 10th, 2010, 06:53 AM
Vehicle list I think.

E: Data>scripts folder

TEMPTii
May 10th, 2010, 06:59 AM
(script startup vehicles
(object_create_anew <vehicle name>)
)

And for this code if you didn't already know, the vehicle name is not like mp_warthog, it's the name you have to assign to the vehicle in the vehicle's properties which is in the properties window in sapien when a vehicle is selected in the "name" field.


Place the script in:
Halo Custom Edition>Data>Levels>(level name)>scripts

exe. C:\Program Files\Microsoft Games\Halo Custom Edition\data\levels\halo3map\scripts\vehicle.hsc

sevlag
May 10th, 2010, 10:29 AM
yeah there is a tut on Hmaps that tells you how to, found it and did that...now i dont have to rely on command codes to spawn shit :D