PDA

View Full Version : [WIP] HK USP



Rentafence
July 8th, 2007, 06:30 PM
Oh noes. I thought this was comming along pretty well, but after showing this newer pic to someone, they said it looks horrible. :( I just want your opinions on it. It's not done yet, and if it is really bad, I dont want to waste my time finishing it.

http://www.maj.com/gallery/rentafence/3d-Models/usp40a.jpg

kenney001
July 8th, 2007, 06:49 PM
it looks horible because your grip is plain right now. So far it actually looks pretty good. I have never seen teh origional gun, but your model looks to be well made. It is just lacking all the details and anything on the grip.

Rentafence
July 8th, 2007, 06:51 PM
Heres a picture of the USP to compare to
http://www.modelguns.co.uk/images/hkusp6.jpg (http://www.modelguns.co.uk/images/hkusp1.jpg)

Con
July 8th, 2007, 07:13 PM
It's not that bad so far. I only see a few little errors. That curved edge near the rear of the gun needs to be more like a bevel, and not a hard edge.

Rentafence
July 8th, 2007, 07:47 PM
I wish somebody would model something original...

Like a penis gun?

Btd69
July 8th, 2007, 08:19 PM
Looks good so far dude, just keep working on it :)

Con
July 8th, 2007, 08:56 PM
Like a penis gun?
hey, they're both long and you cock them and they shoot stuff, I bet nobody has thought of that before /originality

someone needs to make a double-barreled, break-action shotgun. http://en.wikipedia.org/wiki/Double_barreled_shotgun

They just pwn.

Rentafence
July 8th, 2007, 09:01 PM
hey, they're both long and you cock them and they shoot stuff, I bet nobody has thought of that before /originality

LOL! :lmao: That made my day.

Hurrvish
July 8th, 2007, 09:01 PM
From the Wikipedia article:

"One significant advantage that doubles have over single barrelled repeating shotguns is the ability to use more than one choke at a time. Some shotgun sports, such as skeet (http://en.wikipedia.org/wiki/Skeet), use crossing targets presented in a narrow range of distance, and only require one level of choke. Others, like sporting clays (http://en.wikipedia.org/wiki/Sporting_clays), give the shooter targets at differing ranges, and targets that might approach or recede from the shooter, and so must be engaged at differing ranges. Having two barrels lets the shooter use a more open choke for near targets, and a tighter choke for distant targets, providing the optimal shot pattern for each distance." :haw:

Anyways, nice start on the USP, at least it looks better than mine D:
I scrapped it yesterday though.

Rentafence
July 8th, 2007, 09:06 PM
Thanks for the random wiki article, lol. And lets see your USP. I like seeing other peoples stuff. :D

Hurrvish
July 8th, 2007, 09:08 PM
Like I said, I scrapped it because it looked like fail D:

Rentafence
July 8th, 2007, 09:25 PM
Ah. I don't delete my phail. I let it float around so I can find it after a while and lol at it.

Hurrvish
July 8th, 2007, 09:33 PM
My USP looked like a square with protrusions < _ >

Elite Killa
July 8th, 2007, 09:44 PM
hey, they're both long and you cock them and they shoot stuff, I bet nobody has thought of that before /originality
Sigged.

btw nice gun so far. Just needs a bit more detail.

LinkandKvel
July 8th, 2007, 11:07 PM
someone needs to make a double-barreled, break-action shotgun. http://en.wikipedia.org/wiki/Double_barreled_shotgun

They just pwn.
I shall do it for Connie!

Rentafence
July 8th, 2007, 11:21 PM
Double barrel penis shotgun would be the shit. Also, update. :p It's 1.4k triangles thus far, but I still need to do the barrel, magazine, and front sight.

http://www.maj.com/gallery/rentafence/3d-Models/usp40b.jpg

LinkandKvel
July 9th, 2007, 12:09 AM
Might as well use the extra polies you have from the 5,000 limit window.

Rentafence
July 9th, 2007, 12:12 AM
Yeah, im gonna have a ball with that. ^_^

Leiukemia
July 9th, 2007, 12:54 AM
Looks good to me. And I see you used my tutorials, :p

Rentafence
July 9th, 2007, 09:32 PM
I still need to do the magazine.

http://www.maj.com/gallery/rentafence/3d-Models/usp40c.jpg
http://www.maj.com/gallery/rentafence/3d-Models/usp40d.jpg
http://www.maj.com/gallery/rentafence/3d-Models/usp40e.jpg

Hurrvish
July 9th, 2007, 10:05 PM
You are going to fatten up the back, right?

Rentafence
July 9th, 2007, 10:08 PM
...Fuck, is there nobody still worse at modelling than me? :gonk:

So rep me, damnit! But don't cry, you AR15 is purty. D: I would have sex with it. Can you get STD's from that?


You are going to fatten up the back, right?

Wait what? You want me to fatten up the gun? So you can eat it? No way. :mad: Seriously though, what do you mean?

Btd69
July 10th, 2007, 03:39 AM
Got a wireframe?

Rentafence
July 10th, 2007, 09:04 AM
Got a wireframe?

No, but I can make one just for you. :)

QTip05
July 10th, 2007, 02:27 PM
looks pretty good man. gj

Apoc4lypse
July 12th, 2007, 01:20 PM
it looks pretty good, except I'm not sure if the thickness of the gun is accurate, also the safety and other details seem a bit off but there good enough looking I think.. with a good skin itl look nice ingame, but I'm still not sure about the thickness the back seems too skinny, mb needs to be a bit bigger, can't tell from the render angles though, and I don't kno the real size from that reference picture.

other than that it looks good.

EDIT: wudnt mind seeing a wireframe also.

Rentafence
July 12th, 2007, 03:09 PM
http://www.maj.com/gallery/rentafence/3d-Models/uspw.jpg

LinkandKvel
July 13th, 2007, 12:27 PM
How do you render wireframes?

Bastinka
July 13th, 2007, 01:39 PM
The slots in the back seem different than they should be :(

Rentafence
July 13th, 2007, 04:18 PM
The slots in the back seem different than they should be :(

I made them the way they looked in the reference pic. :(

Btd69
July 14th, 2007, 12:26 AM
Looks clean. I'd like to see more of your work :)

SnaFuBAR
July 14th, 2007, 12:30 AM
back of the grip seems way too flat.

dg
July 14th, 2007, 01:11 AM
Better than I could have done. Props to you for the modeling and I hope you continue the good work.