Printable View
Warlord, on lower fps you can feel the latency even if you don't see it. But if you don't, that's fine.
Sean, I forced vsync off on nvidia control panel but even then it goes back to 60fps (my refresh rate) after some time. Sometimes alt-tabbing helps and it goes back to no vsync. There's no simple solution to this problem, I remember many people asking about this and never having been satisfied at the end...
Shame in that case I'll continue to play on the standard settings. Thanks for the reply guys, good to know it's not just me.
If there is anyone that read this topic and thinks easy peacy app creation solution only takes me 5 minutes to either update or create a v1.09 app.
Feel free to do so, since it's actually quite a common problem as can be read from other posts. Cheers!
App would probably come out for 1.07 or 1.08 as not to break compatibility with other applications. Version changer is out there so you can use all your old applications that work on an older executable with the latest version of the game.
Uploaded a few clip test samples to youtube to test the quality I'm very satisfied
http://www.youtube.com/watch?v=_XmE5FKanZ0 - 1080p (1920x1080)
http://www.youtube.com/watch?v=ar0SPAswE1k - 960p (1440x960) ( which youtube does not support :/ )
http://www.youtube.com/watch?v=jyleq_tG6qU - 720p (1280x720)
Sorry about the sound of the shotsfired on 1080p and 960p didn't realize that my sound settings had such an impact at that time. Discovered it after uploading.
Fixed this in the 720p clip which was recorded later.
I think I'll stick to 720p (1280x720) for ingame /recording, works best for Youtube.
Until someone finds a solutions for 1080p :eng101:
So I did some digging on this and did find there is a memory address for forcing 30FPS and switching between Vsync/No Vsync
It switches between the Vsync setting you had set on start up and the 30FPS.
However if you start up with 30FPS it will switch to Vsync by default.
Byte
Halo PC 1.09 address: 006894BA
Halo CE 1.09 address: 00624A9E
0 = Vsync/NoVsync
1 = 30FPS
Hopefully someone could help me dig a bit further to find the address that switches between Vsync and NoVsync. (if there is one)
EDIT: While I just recently suggested to use RadeonPro to set AA on Halo without affecting other apps, the same can be done for forcing No Vsync. So currently running Halo on 1080p with No Vsync thanks to RadeonPro.
I was about to post that about RadeonPro, all you need to do is create a profile for halo and disable vsynch in the visual and tweaks tab.Quote:
Originally Posted by seanaero
Did a test, still need to play around with the encoder for best video size/quality. However my upload speed is totally borked atm, so I can't play around too much, hope to have it resolved soon.
http://www.youtube.com/watch?v=kpbfWX6XL3s
(the embed is 360p, switch to 1080p for best result)
PS. Who said custom maps are dead?
Lol, those guys got fucked hardcore.
Also, H2_ZANZIBAR FTW!
I miss that map. So fucking much.
I'm sad two versions of it are out there and constantly causing me to get mismatches..
So here I used 2 different recording programs first being Camtasia Studio which seemed to skip some frames as demonstrated in the video it did register the MLAA and does not affect the FPS of Halo while recording.
http://www.youtube.com/watch?v=-Lpou_mK1Bg
The other being MSI afterburner which imo looks the best so far, however no MLAA recording.
It seems a bit heavy on the videocard, but no problem for any modern high end video card.
http://www.youtube.com/watch?v=Rjo21vNQdqw
Again all on custom maps, it's not hard to get some games going in EU.
E: Youtube is still processing 1080p so might have to check back in a few minutes if it doesn't show up.