It's a SPAS-12. There's also the SPAS-15, so it's an important distinction. I suggest having a look at a side-on pic of one, so you can see the raised portion of the heatshield towards the rear. There's also somewhat of a lip on the back of the slide, which you'll have to model in. If I had a camera, I'd take a picture of my airsoft replica, but I don't have access to one right now. Also, your bolt is completely on the wrong side of the gun, and there's a bit of the muzzle you're missing. You're also forgetting the rear portion of the ghost ring sight. The SPAS-12 stock also has a hook mounted on the end of it, which allows the stock to be supported by an outstreched arm, enabling it to be fired by a single hand. You're also missing both safety levers, and the rear portion is slightly misshapen. You're also forgetting the forward and rear sling attachment points, and breach detail. Your bolt handle is off, and the slide goes up a little too far on the sides. SPAS-12 doesn't have room for a flashlight there. It's all magazine space. Also, shotguns don't get that kind of trigger. Additionally, the notch in your forward sight serves no purpose whatsoever, sinceOriginally Posted by Daax
Well, as a few of you know im currently working on a SPAS; I added new detail, Here are soem new images of what i have so far.
Tell me what you think could be added; deleted, or fixed. =)
A. A shotgun doesn't need that kind of precision, and
B. It's too far away from the eye for it to have any positive effect whatsoever.
Remember when I told you it was missing "a few details"? I just listed them.
Christ, did you do this all from memory? You're developing the same bad habits as Peng
lol, criticism
Bookmarks