Quote Originally Posted by Xetsuei View Post
I don't personally have any experience but Syuusuke flashed his 7900GTO(a 7900GTX with slower memory) to a 7900GTX, you could ask him.
Bah, apparently I happened to pick the card that won't flash properly without a modification to the card itself...

Quote Originally Posted by 10acjed@Overclock.net
Freelancer;

The evga 285 GTX SSC/FTW come with added pin bridging and higher vGpu/vMem. Stock cards run at 1.18v, the SSC/FTW cards run at 1.24-1.26v so flashing a vanilla card to SSC/FTW will only change clock freq and not voltages, the voltage change is done on the card itself.
See the 285 volt modding page here