offtopic Gallery Thread

[Bodzilla]

:awesome:

[PlasbianX]

Its for a Tshirt im making. Top half is probably gonna be an orange, bottom is gonna be a dark orange... or any other matching colors.

[LlamaMaster]

Whatever it is, it looks awesome. Tee Shirt eh? Are you ordering it online?

[adumass]

Modeled this ump45 over the weekend and past few days, it has a total of 6149 triangles. I couldn't find pictures from all the views so I used other models as reference for things I couldn't see.

[PlasbianX]

Whatever it is, it looks awesome. Tee Shirt eh? Are you ordering it online?

Why order it online when i can simply make it myself? I hand cut the stencil, and then I silk screen the image onto the shirt using a stencil. And the point of the shirt is sorta like.. tribal phoenix

I have a shirt i made of my halo 3 emblem (flame skull) and a Master Chief "Finish the fight" shirt with "... then start a new one" On the back


EDIT: To explain the process, id have 2 sheets of this orange film. Its 2 layers, 1 clear plastic, one a layer that reacts to water and sorta "melts". Since its 2 colors, id cut out the bottom half of the black on 1 sheet, and put it over a mesh. Then i put water over the mesh, and the orange would glue itself to the mesh. Then i pull off the clear backing. I then tape off where i dont want ink, and i use a squeegee to press ink through the mesh onto the shirt, and peel off the mesh. Then i simply heat the shirt under pressure (its heated while being pressed down ;p) for like 15 mins. Then id do the same thing with a new piece of mesh and line up where i want my image... and then repeat. I learned how to do this in a graphics art class, so now when i have some time i take and make some custom tshirts the way i like em.

[Ki11a_FTW]

The first gun i ever made

skin was found on google, like 2 years ago

[Leiukemia]

adumass: Looks pretty decent. over 6000 tris for that is what keeps it from being better then decent. Also, get some better renders. It's really hard to see much, your not even zoomed in to fill the whole screen with the model. Go and find WOL's or my rendering tutorials, or both. And have a look at some renders done by myself and other senior 3d modellers here, you'll see some better angles to use. Also, that reflex sight or scope or whatever its supposed to be, as well as the vert grip and flashlight isn't properly attached to the rail. You should go look at some pictures to see how a rail works. If you work on it some more I'm sure you could come up with a nice model.

[ExAm]

The first gun i ever made

skin was found on google, like 2 years ago

That notch thing in the stock looks like it would be painful in the event of firing.

[Ki11a_FTW]

i would fix it if i stil had the model, but i just showed you guys a pic i posted on halomods a while back.

[Tweek]

Its for a Tshirt im making. Top half is probably gonna be an orange, bottom is gonna be a dark orange... or any other matching colors.

meow WOOF WOOF